Shenzhen Acedo Electronics Technology Co., Ltd

acedo

Intelligent traffic multi-functional Xenon IR Flash strobe light

High integration level, integrating multiple light sources into one, effectively reducing light pollution and avoiding sparrow pole phenomenon;

Supports four working modes: LED flash, LED strobe, gas white light strobe, and gas infrared strobe; Supports one RS485 signal to realize remote control such as brightness adjustment and fault detection to improve operation and maintenance efficiency;

Built-in 24 high-power LED light sources to realize LED strobe and LED burst functions;

Send Email:

Products

Products DETAILS

Intelligent traffic multi-functional Xenon IR Flash strobe light


Description:


This multifunctional environmentally friendly supplement light is an environmentally friendly bayonet professional lamp that integrates LED light source, gas flash and infrared flash. It can realize multiple functions such as warm LED flashlight, warm LED strobe, white light gas strobe and infrared gas strobe to reduce light pollution, simplify system configuration and avoid sparrow pole phenomenon. It uses imported high-power LED chips and imported gas lamps as light sources, and cooperates with the independently developed drive control module and lamp heat dissipation structure, and then undergoes precise optical design to provide professional and environmentally friendly fill light for intelligent transportation and snapshots. Products are widely used in electronic police, security checkpoints, road monitoring and other systems.


Features:

  High integration level, integrating multiple light sources into one, effectively reducing light pollution and avoiding sparrow pole phenomenon;

  Supports four working modes: LED flash, LED strobe, gas white light strobe, and gas infrared strobe;

  Supports one RS485 signal to realize remote control such as brightness adjustment and fault detection to improve operation and maintenance efficiency;

  Built-in 24 high-power LED light sources to realize LED strobe and LED burst functions;

  Imported gas lamps are used to realize the gas strobe function and improve the face capture effect during the day; the built-in infrared filter realizes switching between white light and infrared strobe through a stepper motor;

  Built-in temperature sensor with over-temperature protection function;

  Supports LED strobe synchronization camera video fill light, automatic frequency doubling;

  Both LED strobe and gas flash support TTL level and switch quantity synchronous triggering methods;

  The recycle time of the gas light source is less than 60ms, supporting super-speed continuous shooting;

  Supports statistical functions of trigger counting and flash times;

  Supports shielding of false trigger interference signals to ensure normal use of the device. When the number of external triggers is greater than the false detection threshold, the flash enters the protection state and will not respond to the next trigger signal until the protection ends;

  Aluminum alloy lamp body, fin-type heat dissipation structure, high temperature resistant PC mask, good light transmission effect;

  The protection level adopts IP66 design, which is waterproof and dustproof; good heat dissipation design prevents the flash from being damaged by high-frequency flash;

  Streamlined appearance design, easy to install.


Application Environment:

  electronic police system

  Security checkpoint system

  Speed capture system


Technical parameters:


Model

A-TG400

Xenon parameters

Flash energy

 200J

Flash duration

 1/3000s

Call back time

 <60ms

Color temperature value (K)

 5500K±500K

Infrared white light switching

 support

Infrared wavelength

 750-900nm

Exposure index

 64GN

Strobe counting

 supports strobe and trigger counting functions

Service life

 ≥20 million times

Center illumination

 ≤4000Lx (white light)

Brightness adjustment

 supports xenon with adjustable brightness from 1 to 16 levels

LED parameters

LED Quantity

 24 (imported CREE warm light LED)

LED peak power

 ≤60W

Average power consumption

 ≤15W

LED luminous flux

 1500lm

LED color temperature

 3000K (warm light)

Automatic multiplier

 support

Strobe function

 support

Strobe time

 0-4ms adjustable

Flash frequency

 ≤120Hz

Center illumination

 <20lx (20m illumination)

Brightness adjustment

 supports LED 1~16 levels of brightness adjustable

Other parameters

Multifunctional integrated type

 supports four modes: LED strobe, LED strobe, white light xenon strobe, and infrared xenon strobe.

Effective fill light distance

 16m-25m

Spot coverage

 single lane

Pulse and comprehensive protection

 false triggering pulse protection

Synchronized fill light for snapshots

 Supports synchronized supplement light for snapshots

Video synchronization fill light

 supports video synchronization supplement light function

Trigger mode

 level trigger +5VDC; switch value

RS485 remote control

 Supports RS485 for remote control such as brightness adjustment, fault detection, etc.

Interface

 1 strobe input, 1 strobe input, 1 RS485

Light spot brightness

 Under the marked installation scene, the surrounding environment of the car body, car body features and facial features of the people inside can be seen clearly

Working environment temperature

 -40-+80 (safe to use within -40/with attenuation)

Working environment humidity

 10%-90%@40, no condensation

Protection level

 IP66

  Weight

 6.5kg

Power supply voltage

 AC220V±20%/48Hz-52Hz

Appearance size

 L520mm×W305mm×H230mm



Hotline

+86-13724374441

acedo-sz

Wechat