Shenzhen Acedo Electronics Technology Co., Ltd

Home
Products
LED illuminator
Traffic Light

4 in 1 multifunctional intelligent traffic gas IR strobe illuminator

High integration level, integrating multiple light sources into one, effectively reducing light pollution and avoiding sparrow pole phenomenon;

Supports four working modes: LED strobe, LED strobe, gas white light strobe, and gas infrared strobe;

Supports one RS485 signal to realize remote control such as brightness adjustment and fault detection to improve operation and maintenance efficiency;

Built-in 16 high-power LED light sources to realize LED strobe and LED flash functions;

Send Email:

[email protected]

Products

Products DETAILS

4 in 1 multifunctional intelligent traffic gas IR strobe illuminator

Description:

This four-in-one environmentally friendly fill light is an environmentally friendly bayonet professional lamp that integrates LED light source, gas flash and infrared flash. It can realize multiple functions such as warm LED strobe, warm LED strobe, white light gas strobe and infrared gas strobe to reduce light pollution, simplify system configuration and avoid sparrow pole phenomenon. It uses imported high-power LED chips and imported gas lamps as light sources, and cooperates with the independently developed drive control module and lamp heat dissipation structure, and then undergoes precise optical design to provide professional and environmentally friendly fill light for intelligent transportation and snapshots. Products are widely used in electronic police, security checkpoints, road monitoring and other systems.

Features:

High integration level, integrating multiple light sources into one, effectively reducing light pollution and avoiding sparrow pole phenomenon;

Supports four working modes: LED strobe, LED strobe, gas white light strobe, and gas infrared strobe;

Supports one RS485 signal to realize remote control such as brightness adjustment and fault detection to improve operation and maintenance efficiency;

Built-in 16 high-power LED light sources to realize LED strobe and LED flash functions;

Imported gas lamps are used to realize the gas flash function and improve the effect of capturing faces during the day;

Built-in infrared filter, switching between white light and infrared flash through stepper motor;

Built-in temperature sensor with over-temperature protection function;

Supports LED strobe synchronization camera video fill light, automatic frequency doubling;

Both LED strobe and gas flash support TTL level and switch quantity synchronous triggering methods;

The recycle time of the gas light source is less than 60ms, supporting super-speed continuous shooting;

Supports statistical functions of trigger counting and flash times;

Supports shielding false trigger interference signals to ensure normal use of the device. When the number of external triggers is greater than the false detection threshold, the flash enters the protection state and will not respond to the next trigger signal until the protection ends;

Aluminum alloy lamp body, fin-type heat dissipation structure, high temperature resistant PC mask, good light transmission effect;

The protection level adopts IP66 design, which is waterproof and dustproof;

Good heat dissipation design prevents the flash from being damaged by high-frequency flash;

Streamlined appearance design, easy to install.

Application Environment:

electronic police system

Security checkpoint system

Speed capture system

Technical parameters:

Model	TG430
Xenon parameters
Flash energy	200J
Flash duration	1/3000s
Call back time	<60ms
Color temperature value (K)	5500K±500K
Infrared white light switching	support
Infrared wavelength	750-900nm
Exposure index	64GN
Strobe counting	supports strobe and trigger counting functions
Service life	≥20 million times
Center illumination	≤4000Lx (white light)
Brightness adjustment	supports xenon with adjustable brightness from 1 to 16 levels
LED parameters
Number of lamp beads	16 (imported CREE warm light LED)
LED peak power	≤90W
Average power consumption	≤23W
LED luminous flux	3600lm
LED color temperature	3000K (warm light)
Automatic multiplier	support
Strobe function	support
Strobe time	0-4ms adjustable
Flash frequency	≤120Hz
Center illumination	<60lx (20m illumination)
Brightness adjustment	supports LED 1~16 levels of brightness adjustable
Other parameters
Multifunctional integrated type	supports four modes LED strobe, LED strobe, white light xenon strobe, and infrared xenon strobe.
Effective fill light distance	16m-25m
Spot coverage	single lane
Pulse and comprehensive protection	false triggering pulse protection
Synchronized fill light for snapshots	Supports synchronized supplement light for snapshots
Video synchronization fill light	supports video synchronization supplement light function
Trigger mode	level trigger +5VDC; switch value
RS485 remote control	Supports RS485 for remote control such as brightness adjustment, fault detection, etc.
Interface	1 strobe input, 1 strobe input, 1 RS485
Light spot brightness	Under the marked installation scene, the surrounding environment of the car body, car body features and facial features of the people inside can be seen clearly
Working environment temperature	-40-+80℃ (safe to use within -40℃/with attenuation)
Working environment humidity	10%-90%@40℃, no condensation
Protection level	IP66
Weight	4.5kg
Power supply voltage	AC220V±20%/48Hz-52Hz
Appearance size	L550mm×W264mm×H210mm