VGA to AV video converter

The whole family shares one computer,watching movies and playing games on the internet.

The popularization of computers brings great conveniences for peoples's VGA signals into

Video/S video signals.The movies you downloaded from the internet can be entirely combined

to the family cinema,and you can easily experience cinema effection .You also can demonstrate

the BRM need to be presented to the audience through the large -screen TV... Video Converter

can easily help you to realize the conversion of VGA signals into Video /S video signals

Features:

Performance Characteristics :

one input of VGA signals, one output of VGA signals

one output of Video ,one output of Svideo'

one ACPI of 5V

Resolution of VGA signals:640*480@60/72/75/85HZ,800*600@60/75HZ,1024*768@60/75Hz ,

1280*1024@60Hz

At the same time, output the VGAVIDEOS-VIDEO signals

Show simultaneously pictures on the monitor and TV

Support the systems below:

The tv SYSTEMS OF NTSC(TAIWAN and USA),NTSC-EIAJ(Japan),PAL(EURO,China)PAL-M(Brazil),

PAL-N(Uruguay Paraguay)

Support the OVERSCAN and UNDERSCAN display mode

Convenient to carry because it is light ,thin ,short and small

Volume:110mm(length)*56mm(width)*36mm(height)

Item	Spec.
(1)DC 5V	To connect PC USB port or DC 5V external power supply
(2)switch	Video system PAL/NTSC switch
(3)Video Out	To connect Composite Video display
(4)S-Video Out	To connect S-Video display
(5)VGA Out	To connect PC monitor LCD
(6)VGA In	To connect PC Host

Item	Spec.
(1)(2)(3)(4)up/down/left /right key	Click it to adjust the position of output picture.
(5)MENU	Click it enter into "OSD". Press it and hold on for 3 seconds to return to default setting
(6)ZOOM	Click it to magnify the screen and click it once again to return to normal display

Troubleshooting :

1.No VGA Output is displayed.
Please check power supply and all cables are rightly connected.

2.No Composite Video or S-Video output.
Please check the RCA cable and s-video cable is in good condition and rightly connected; and the composite video or s-video display devices are switched to the right mode.

3.VGA output picture is not good. It may be caused by insufficient power from USB port.
Please try to connect a DC 5V external power supply. Or you can try to change PC resolution and refresh rate